Childcare Centre Safety Surfacing - preserve your Synthetic Grass with CombiFlex
CombiFlex® Projects – Childcare Centre Playgrounds
Project: Children’s play area in Child Care Centre Brisbane
Requirement: Drainage and Critical fall height – reduced surface heat, longer life of artificial grass, good drainage and reduced playground injuries.
Solution: CombiFlex® + CombiMesh under artificial grass in Child Care Centre.
CombiFlex® provides critical fall height in children’s playgrounds.For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR.
Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is made from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wet pour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down. This results in safety reduction, ongoing maintenance and frequent replacement.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage, longer life and dryer surfaces given the drainage functionality.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombiTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Contact Cam Horne
+614023604446
Sustainability in Splash pads - fall protection and cushioning to protect falls
Sustainability and safety in aquatic playgrounds and splash pads CombiLock® and CombiFlex® Products
Project: Splash pad in St Clairsville
Requirement: Sustainable splash pad installation to replace wetpour.
Solution: Combilock® + Combiflex® in a wet playground
CombiFlex® provides critical fall height in wet playgrounds and Combilock® provides a slip resistance and a sustainable water drainage solution in splash pads and wet playgrounds. Water and chemical savings are significant and unmatched by competitor products.
Combilock® is the only specifically engineered product to provide water drainage and cushioning in splash pads and water parks. It is not reliant on adhesives and offers a 5 year warranty which is far in excess of any competing products. Combilock® is used in splash pads to pools, waterparks, locker rooms and bathrooms.
CombiTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Contact Cam Horne
+614023604446
Florida Splashpad Installation -Combitile wetpour replacement
Combilock® and CombiFlex® Projects – sustainability in water playgrounds
Project: Splashpad in Florida
Requirement: Sustainable splash pad installation to replace wetpour.
Solution: Combilock® + Combiflex® in a wet playground
CombiFlex® provides critical fall height in wet playgrounds and Combilock® provides a non slip and water drainage solution in splashpads and wet playgrounds
There is an increasing need for sustainable splashpad solutions to reduce water wastage and reduce chemical usage in splashpads and water playgrounds. The Combitile range of products has just been installed in Florida, USA after the chemicals and UV attacked tradition the wetpour solution. Combitile does not require adhesives and offers a 5 year warranty which is far in excess of any competing products.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
CombiTile - Winner of the 2022 SAPIA AWARDS
SAPIA AWARDS 2022
Sports and Play Industry Association
Category: Innovation
Winner: CombiTile Australia
Product: CombiFlex – critical fall height and drainage tile.
CombiFlex
CombiFlex
– under EPDM (wet-pour)
CombiFlex
– under synthetic turf.
CombiTile Australia is delighted to accept the Sports and Play Industry Association of Australia, 2022 Award for Innovation, with the CombiFlex critical fall height and drainage tile.
CombiFlex is 100% Australian owned and manufactured, is recyclable, uses no VOC’s in manufacture, offers a 5-year warranty, is repositionable and weighs 15% that of recycled rubber to achieve a similar critical fall height rating. www.combitile.com CombiFlex has achieved a critical fall height of 2.7m (ASNZ4422:2016) under synthetic turf, and 2.5m under EPDM (wetpour).
Thank you to the SAPIA members and Board, and those within the industry and governments, and our international partners, for supporting the Australian owned and manufactured CombiFlex product.
CombiTile will be exhibiting at the IAAPA Expo in Orlando, Florida (International Association of Amusement Parks and Attractions) in November with our USA distributor AquaSeal LLC.
CombiFlex + EPDM – school rooftop
CombiFlex – before EPDM
CombiFlex + EPDM – school rooftop
CombiFlex – before EPDM
CombiFlex – before EPDM and under CombiLock splash-pad tile
CombiFlex – before EPDM
CombiFlex – EPDM-school playground
CombiFlex – EPDM–play area
CombiFlex – pre synthetic turf
CombiFlex – with synthetic turf
original 2016 synthetic turf in June 2022
CombiFlex – pre synthetic turf
CombiFlex – with synthetic turf
CombiFlex – pre & post synthetic turf
ROOFTOP PLAYGROUND INSTALLATION HONG KONG - COMBIFLEX DELIVERS AGAIN
CombiFlex® Projects – Rooftop Playgrounds & High Rise Playgrounds
Project: Children’s play area – rooftop in Hong Kong
Requirement: Drainage and Critical fall height – reduced surface heat, good drainage and reduced playground injuries.
Solution: CombiFlex® + CombiMesh using wet pour on high rise rooftop playground
CombiFlex® provides critical fall height in children’s playgrounds.For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR.
Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is made from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wet pour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down. This results in safety reduction, ongoing maintenance and frequent replacement.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
NEW COMBITILE SPLASH PAD INSTALLATION AT COUNCIL WATER PARK
CombiTile has recently installed CombiLock® over CombiFlex® at a regional council splash pad. The council required splash pad safety and required a water management solution for this barefoot playground. Combitile was able to address Critical Fall Height standards and reduced water consumption.
CombiLock over CombiFlex provides 2.5 metres Critical Fall Height whilst the drainage cell of CombiLock reduces water loss by 30%. Playground fall height safety is a key concern of councils as is splash pad maintenance – Combitile is a long term replacement for traditional pour in place (EPDM) options which require regular replacement due to their lack of chlorine and UV resistance.
CombiTile provide a 5 year product warranty and is not reliant on adhesives. There is a global shortage of adhesives which is impacting the Aquatic and Splash Pad industry significantly.
CombiTile is a key strategic partner for inclusiveness as many splash parks are designed with a zero-depth entry, enabling people with mobility impairments to use the same entrance as other visitors. The lack of pooling water also encourages people of all ages and abilities to experience the fun.
CombTile products meet the following Australian Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Childrens Wet Playground Australian Open Tennis Championships 2020
COMBIFLEX INSTALLED ON ROOFTOP & HIGHRISE PLAYGROUND IN HONGKONG - GRASS AND WETPOUR
CombiFlex® Projects – Rooftop & High Rise Playgrounds
Project: Children’s play area – rooftop in Hong Kong
Requirement: Drainage and Critical fall height. – reduced surface heat and good drainage.
Solution: CombiFlex® + CombiMesh using wetpour and artificial grass.
CombiFlex® eliminates the use of styrene-butadiene rubber (SBR) as the critical fall height material.
For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR. Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is made from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wetpour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down. This results in safety reduction, ongoing maintenance and frequent replacement.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
COMBIFLEX INSTALLED AT CHILDREN'S PLAYGROUND - REPLACES SBR
CombiFlex® Projects
Project: Children’s play area
Requirement: Critical fall height in excess of 2 metres (over 8 feet) and certified under ASNZ4422:2016, reduced surface heat and good drainage.
Solution: CombiFlex® + CombiMesh using wetpour, providing a CFH of 2.7m (ASNZ4422:2016) and excellent drainage.
CombiFlex® eliminates the use of styrene-butadiene rubber (SBR) as the critical fall height material.
For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR. Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is 100% owned, invented and manufactured in Australia from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wetpour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down.
CombiFlex® is distributed in the USA through Aquaseal Resurfacing LLC – in additions to installations in Australia and USA, we also have installations in Asia and formulating agreements with European counter parties.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
COMBIFLEX PRODUCT OF CHOICE AT NELLIS AIR FORCE BASE USA
CombiTile USA distributor AquaSeal Resurfacing, LLC has installed CombiLock® over CombiFlex® at the Nellis Air Force Base, Nevada. This was to replace eroded wetpour / EPDM. CombiLock® is ideal for splash pads, aquatic playgrounds, pool surrounds and shower areas.
The Director of Housing, Nellis Air Force Base, Hunt Military Communities described to George Coon of AquaSeal Resurfacing, LLC that CombiLock® over CombiFlex® was state of the art and outlines the research undertaken in a 1 minute video below.
https://www.facebook.com/ken.millard.9275/videos/517511626289155/
CombiLock over CombiFlex provides 2.5 metres (over 8 feet CFH) Critical Fall Height whilst the drainage cell design of CombiLock reduces water loss by 30%.
CombiTile provides a 5 year product warranty and is not reliant on adhesives. There is a global shortage of adhesives which is impacting the Aquatic and Splash Pad industry significantly.
Non slip splash pads and non slip water play areas are paramount and the simplicity of laying of CombiFlex® is the barefoot play area solution.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
COMBITILE INSTALLATION AT COUNCIL WATER PARK
CombiTile has recently installed CombiLock® over CombiFlex® at a regional council playground. The council wanted to address Critical Fall Height concerns and water sustainability issues. CombiLock over CombiFlex provides 2.5 metres Critical Fall Height whilst the drainage call of CombiLock reduces water loss by 30%. Water loss is a key factor for Regional and City Councils as they seek to address sustainability challenges.
CombiTile provide a 5 year product warranty and is not reliant on adhesives. There is a global shortage of adhesives which is impacting the Aquatic and Splash Pad industry significantly.
CombiTile is a key strategic partner for inclusiveness as many splash parks are designed with a zero-depth entry, enabling people with mobility impairments to use the same entrance as other visitors. The lack of pooling water also encourages people of all ages and abilities to experience the fun.
CombTile products meet the following Australian Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Childrens Wet Playground Australian Open Tennis Championships 2020