Childcare Centre Safety Surfacing - preserve your Synthetic Grass with CombiFlex
CombiFlex® Projects – Childcare Centre Playgrounds
Project: Children’s play area in Child Care Centre Brisbane
Requirement: Drainage and Critical fall height – reduced surface heat, longer life of artificial grass, good drainage and reduced playground injuries.
Solution: CombiFlex® + CombiMesh under artificial grass in Child Care Centre.
CombiFlex® provides critical fall height in children’s playgrounds.For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR.
Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is made from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wet pour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down. This results in safety reduction, ongoing maintenance and frequent replacement.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage, longer life and dryer surfaces given the drainage functionality.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombiTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Contact Cam Horne
+614023604446
Sustainability in Splash pads - fall protection and cushioning to protect falls
Sustainability and safety in aquatic playgrounds and splash pads CombiLock® and CombiFlex® Products
Project: Splash pad in St Clairsville
Requirement: Sustainable splash pad installation to replace wetpour.
Solution: Combilock® + Combiflex® in a wet playground
CombiFlex® provides critical fall height in wet playgrounds and Combilock® provides a slip resistance and a sustainable water drainage solution in splash pads and wet playgrounds. Water and chemical savings are significant and unmatched by competitor products.
Combilock® is the only specifically engineered product to provide water drainage and cushioning in splash pads and water parks. It is not reliant on adhesives and offers a 5 year warranty which is far in excess of any competing products. Combilock® is used in splash pads to pools, waterparks, locker rooms and bathrooms.
CombiTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
Contact Cam Horne
+614023604446
Florida Splashpad Installation -Combitile wetpour replacement
Combilock® and CombiFlex® Projects – sustainability in water playgrounds
Project: Splashpad in Florida
Requirement: Sustainable splash pad installation to replace wetpour.
Solution: Combilock® + Combiflex® in a wet playground
CombiFlex® provides critical fall height in wet playgrounds and Combilock® provides a non slip and water drainage solution in splashpads and wet playgrounds
There is an increasing need for sustainable splashpad solutions to reduce water wastage and reduce chemical usage in splashpads and water playgrounds. The Combitile range of products has just been installed in Florida, USA after the chemicals and UV attacked tradition the wetpour solution. Combitile does not require adhesives and offers a 5 year warranty which is far in excess of any competing products.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177
ROOFTOP PLAYGROUND INSTALLATION HONG KONG - COMBIFLEX DELIVERS AGAIN
CombiFlex® Projects – Rooftop Playgrounds & High Rise Playgrounds
Project: Children’s play area – rooftop in Hong Kong
Requirement: Drainage and Critical fall height – reduced surface heat, good drainage and reduced playground injuries.
Solution: CombiFlex® + CombiMesh using wet pour on high rise rooftop playground
CombiFlex® provides critical fall height in children’s playgrounds.For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR.
Volatile Organic Compound (VOC) binder/adhesive additives are not present in CombiFlex®.
With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.
CombiFlex® is made from a high impact polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wet pour materials ( ie not using wetpour over CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down. This results in safety reduction, ongoing maintenance and frequent replacement.
CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.
CombTile products meet the following Standards
AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177