CombiTile - Winner of the 2022 SAPIA AWARDS

CombiTile logo
winner
The Sports and Play Industry Association

SAPIA AWARDS 2022
Sports and Play Industry Association
Category: Innovation
Winner: CombiTile Australia
Product: CombiFlex – critical fall height and drainage tile.

CombiFlex

CombiFlex

CombiFlex - under EPDM (wet-pour)

CombiFlex

– under EPDM (wet-pour)

CombiFlex - under synthetic turf

CombiFlex

– under synthetic turf.

CombiTile Australia is delighted to accept the 
Sports and Play Industry Association of Australia, 
2022 Award for Innovation, with the CombiFlex critical fall height and drainage tile.

CombiFlex is 100% Australian owned and manufactured, is recyclable, uses no VOC’s in manufacture, offers a 5-year warranty, is repositionable and weighs 15% that of recycled rubber to achieve a similar critical fall height rating. www.combitile.com

CombiFlex has achieved a critical fall height of 2.7m (ASNZ4422:2016) under synthetic turf, and 2.5m under EPDM (wetpour).

Thank you to the SAPIA members and Board, and those within the industry and governments, and our international partners, for  supporting the Australian owned and manufactured CombiFlex product.
CombiTile will be exhibiting at the IAAPA Expo in Orlando, Florida (International Association of Amusement Parks and Attractions) in November with our USA distributor AquaSeal LLC.

CombiFlex + EPDM – school rooftop

CombiFlex + EPDM – school rooftop

CombiFlex – before EPDM

CombiFlex – before EPDM

CombiFlex + EPDM – school rooftop

CombiFlex + EPDM – school rooftop

CombiFlex – before EPDM

CombiFlex – before EPDM

CombiFlex – before EPDM and ?under CombiLock splash-pad tile

CombiFlex – before EPDM and under CombiLock splash-pad tile

CombiFlex – before EPDM

CombiFlex – before EPDM

CombiFlex – EPDM-school playground

CombiFlex – EPDM-school playground

CombiFlex – EPDM–play area

CombiFlex – EPDM–play area

CombiFlex – pre synthetic turf

CombiFlex – pre synthetic turf

CombiFlex – with synthetic turf

CombiFlex – with synthetic turf

original 2016 synthetic turf in June 2022

original 2016 synthetic turf in June 2022

CombiFlex – pre synthetic turf

CombiFlex – pre synthetic turf

CombiFlex – with synthetic turf

CombiFlex – with synthetic turf

CombiFlex – pre & post synthetic turf

CombiFlex – pre & post synthetic turf


Article on choice.com.au: 'Not all playground surfaces are equal'

Kids don't always bounce back

By Chris Barnes (published 24/7/17 on choice.com.au)

Thanks to improved safety standards (particularly the removal of unsafe playground equipment and a reduction in the height of structures) playgrounds today are safer and injury rates for the most catastrophic head injuries have significantly declined. Unfortunately, not all is going well. The bad news is that fractures - particularly to the shoulder, wrist, forearm and elbow - are up, with those aged five to nine years most affected.

While overcrowding, lack of adult supervision and more "boring" equipment that children misuse have been blamed, the biggest culprit remains playground design. But the surprise is that it's not just about what children are falling from – mostly monkey bars – but what they're falling onto. That is, children are mostly injured when they fall from play equipment onto a hard surface.

Surface materials

Having a well maintained, appropriate playground surface significantly lowers the risk of injury when kids take a tumble. But how do you know which playground surface will be safe, and which one may contribute to a broken bone or worse?

In order to be safe, the surface under all playground equipment should be soft. The variety of playground impact absorbing surface materials each have a distinct list of strengths and weaknesses but there are two things they should all have in common:

  • They comply with the Australian standard.
  • They absorb the energy of a child's fall over a long period of time and over a great distance. That is, the child sinks into the surface and doesn't rebound.

The following list contains the pros and cons of the different surface materials available.

Bark softfall (composted lignin mulch)

Pros

  • Low initial cost
  • Spreads easily
  • Easy to install
  • Readily available

Cons

  • Easily displaced
  • Needs weekly maintenance and a top-up at least four times a year
  • Impact absorption weakened if too shallow, wet, frozen or combined with dirt
  • May conceal hazardous objects (eg. broken glass, syringes)
  • Not suitable for wheelchair access

Traps

  • Watch out for timber-based products with sharp edges or product so fine it can be inhaled
  • Must be installed to the suggested minimum depth of 40cm

Impact-absorbing sand

Pros

  • Low initial cost
  • Doesn't deteriorate readily with usage
  • Easy to install
  • Readily available

Cons

  • Combines with dirt; may compact
  • May conceal hazardous objects (eg. broken glass, syringes)
  • May conceal animal faeces
  • Attractive to animals
  • Easily displaced
  • Not suitable for wheelchair access

Traps

  • Not all sand is good sand. Some sand types compact to concrete-like hardness. It must be impact-absorbing, suitable for playgrounds.
  • Be sure to install to the suggested minimum depth of 40cm.

Wet pour rubber (AKA softfall rubber)

Pros

  • Durable, low maintenance
  • Water-permeable surface
  • Environmentally friendly, as uses waste product
  • Suitable for wheelchair access

Cons

  • Can be expensive to install
  • Can get very hot in summer
  • Bounce can compound injuries
  • Can be slippery when wet

Traps

  • A visual inspection cannot tell you a good rubberised surface from a poor one. Only certified testing can, so contact your school or council for information on their compliance testing if you are unsure.

Rubber tiles and pavers

Pros

  • Durable, low-maintenance
  • Water-permeable surface
  • Suitable for wheelchair access
  • Can be installed over concrete, asphalt or other hard surfaces

Cons

  • Extremely expensive
  • Often needs a level site
  • Bounce can compound injuries
  • Can be slippery when wet

Traps

  • Curling tiles can be a trip hazard.
  • A visual inspection cannot tell you a good rubberised surface from a poor one. Only certified testing can, so contact your school or council for information on their compliance testing if you are unsure.

Bounce is bad

The big problem with rubber is it induces bounce. And when it comes to injury, bounce is bad: children can rebound several times on the injured part. Some companies overcome this problem with the insertion of polystyrene foam embedded in the rubber product. If you're installing a playground they're worth seeking out. But unfortunately, as a parent, there is no way of visually recognising a rubber playground surface with this protective property.

Maintenance

It's no use having a perfectly installed playground surface, particularly of the high-maintenance bark mulch or sand variety, if it's not regularly maintained. For sand or bark softfall, 30cm is minimum safe surface depth and ideally at least 40cm should be maintained at all times. In popular playground spaces this means bark particularly should be raked on a weekly basis and topped up at least quarterly.

Protect your kids

If you're putting a playground in at home:

  • Take care getting the foundation right.
  • Select a material you can and will maintain.
  • Ensure you lay the material deep enough.

If you're taking your child to the local playground:

  • Be aware of how deep softfall materials need to be for safety.
  • If the surface is rubber, be prepared to call your school or council and ask some hard questions about safety testing.

(VIEW THIS ARTICLE ON CHOICE.COM.AU...)

 


Kidsafe logo

Kidsafe Statement - June 2015

The Australian Standard ASNZS 4685:2014 details the usage of impact absorbing materials in children’s playground and defines relevant terms and conditions.The standard prescribes that for free fall heights of 600mm or greater the fall zone must be covered with Softfall material of certified Critical Fall Height greater than the free fall height. For free fall heights of less than 600mm, non certified impact absorbing material may be used in the fall zones.

Further conditions apply to loose fill material. It should be installed to the depth shown in the test report, which should be not less than 200mm. However because it will deteriorate during use, an additional depth (the material allowance) should be laid in high traffic areas, such as under swings and slippery dips. An additional 20% depth is required.

The free fall height refers to the greatest vertical distance to the ground from any platform or railing on playground equipment to which a child has access.

The fall zone is the area of ground under the base of equipment. For early childhood play it is 1.5m wide in all directions and for older children 1.5m to 2.5m wide depending on equipment height.

VISIT THE KIDSAFE WEBSITE