| SURFACING |  CombiLock® over concrete (no attenuation required) | CombiLock® decorative tile over CombiFlex® drainage & attenuation layer |  PIP over CombiFlex® drainage & attenuation layer | Poured-in-Place (PIP) over SBR | Poured-in-Place (PIP) over drainage cells & SBR | Plastic and foam rubber tiles over concrete (no CFH required) | Poured-in-Place over concrete (no attenuation required) |
|---|---|---|---|---|---|---|---|
| PROPERTIES |  |  |  |  |  |  |  |
| Resistant to chlorine attack | 9 | ||||||
| Resistant to mould & fungus | |||||||
| Resistant to water build-up causing deterioration | 6 | ||||||
| Effective drainage | 3 | 10 | |||||
| Consistent CFH | 4 | 4 | 7 | ||||
| Durability / longevity | 5 | 8 | 11 | ||||
| All weather application | 1 | ||||||
| Ease & speed of installation | |||||||
| DIY (Do It Yourself) Option | |||||||
| VOC (posing no risk to applicators) | |||||||
| Competitively priced | 2 | 2 | |||||
| Recycled or recyclable | |||||||
| Minimal / inexpensive maintenance |
1 Weather must be fine for PIP layer only
2 Varies depending on contractor
3 Drainage can be an issue with finer grades of SBR most commonly used
2 Varies depending on contractor
3 Drainage can be an issue with finer grades of SBR most commonly used
4 CFH can be unpredictable as compaction of SBR can vary
5 Can harden over time in exposed areas
6 Surface drainage
5 Can harden over time in exposed areas
6 Surface drainage
7 Depends on underlay
8 Varies with contractor expertise
9 Suspect resistance
8 Varies with contractor expertise
9 Suspect resistance
10 Mainly surface drainage
11 May fade depending on product
11 May fade depending on product