critical fall geight playgrounds,

COMBIFLEX INSTALLED AT CHILDREN'S PLAYGROUND - REPLACES SBR

CombiFlex® Projects

Project: Children’s play area

Requirement: Critical fall height in excess of 2 metres  (over 8 feet) and certified under ASNZ4422:2016, reduced surface heat and good drainage.

Solution: CombiFlex® + CombiMesh using wetpour, providing a CFH of 2.7m (ASNZ4422:2016) and excellent drainage.

CombiFlex® eliminates the use of styrene-butadiene rubber (SBR) as the critical fall height material.

For an equivalent level of critical fall height CombiFlex weighs approximately 12% of the equivalent SBR.   Volatile Organic Compound (VOC)  binder/adhesive additives are not present in CombiFlex®.

 

With expected changes in playground standards requiring critical fall height testing annually, CombiFlex® offers a durable long term solution for reliable critical fall height surfacing with a 5 year warranty. CombiFlex® sites have had consistent ASNZ422:2016 critical fall height results without deterioration or erosion.

CombiFlex® is 100% owned, invented and manufactured in Australia from a high impact  polypropylene copolymer and provides excellent critical fall height in children’s playgrounds. Play areas using just wetpour materials ( ie not using wetpour over  CombiFlex® ) have varying reductions of critical fall height over time as the surface compacts and wears down.

CombiFlex® is distributed in the USA through Aquaseal Resurfacing LLC  – in additions to installations in Australia and USA, we also have installations in Asia and formulating agreements with European counter parties.

CombiFlex® requires minimal adhesive and is not impacted by the current global adhesive shortage.

 

 

 

 

 

 

CombTile products meet the following Standards

 

AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177


COMBIFLEX PRODUCT OF CHOICE AT NELLIS AIR FORCE BASE USA

CombiTile USA distributor AquaSeal Resurfacing, LLC has installed CombiLock® over CombiFlex® at the Nellis Air Force Base, Nevada. This was to replace eroded wetpour / EPDM. CombiLock® is ideal for splash pads, aquatic playgrounds, pool surrounds and shower areas.

The Director of Housing, Nellis Air Force Base, Hunt Military Communities described to George Coon of AquaSeal Resurfacing, LLC that  CombiLock® over CombiFlex® was state of the art and outlines the research undertaken in a 1 minute video below.

https://www.facebook.com/ken.millard.9275/videos/517511626289155/

CombiLock over CombiFlex provides 2.5 metres (over 8 feet CFH)  Critical Fall Height whilst the drainage cell design of CombiLock reduces water loss by 30%.

CombiTile provides a 5 year product warranty and is not reliant on adhesives.  There is  a global shortage of adhesives which is impacting the Aquatic and Splash Pad industry significantly.

Non slip splash pads and non slip water play areas are paramount and the simplicity of  laying of CombiFlex® is the barefoot play area solution.

 

 

 

CombTile products meet the following Standards

 

AS NZ4422:2016
AS NZ4586:2013
AS TM F1292
EN1177